Shun Hachisuka

Link to Design Journal

Journal Entry For

Module 5 - Flex Your Form

ACC Folder Link

https://acc.autodesk.com/docs/files/projects/7a6d9404-5c50-4d49-acbd-cf67d7302936?folderUrn=urn%3Aadsk.wipprod%3Afs.folder%3Aco.YeihdJ7bQ8SlImFmYEF55A&viewModel=detail&moduleId=folders

Step 1 - 3

The image on the left-hand side is my own design building and the one on the right-hand side is an example of this assignment’s conceptual mass form. Figure 2 shows the input values and the result is calculated in Table 2.

Figure 1 Left: Part 2 Model, Right: Part1 Model

Figure 1 Left: Part 2 Model, Right: Part1 Model

Figure 2 Input values for Height

Figure 2 Input values for Height

Table 1 Summary table of Step3

Table 1 Summary table of Step3

Step 4 - 6 Figure 3 shows my profiles that is representing floor shapes. The profile consists of three ellipses and each ellipse is parametrically flexed in terms of distance and radius from the center. The mass family has the dimensions as shown in Figure 4. To compute the evaluation result, I set two parameters as Figure 5 illustrates and the result is shown in Table 2.

Figure 3 Profile of Mass Family

Figure 4 Mass Family Dimensions

Figure 4 Mass Family Dimensions

Figure 5 Input values for Height and Rotation

Figure 5 Input values for Height and Rotation

Table 2 Summary table of Step6

Table 2 Summary table of Step6