✅ Completed / Past Weeks
Module 1 | Class Overview & Logistics
Module 2 | Modeling Building Elements Basic Models / Single-Story Buildings
Module 3 | Modeling Building Elements Advanced Models / Multi-Story Buildings
Module 4 | Sharing Building Models
Module 5 | Modeling Time Phases and Design Alternatives
Module 6 | Conceptual Modeling
Module 7 | Structural Modeling & Model Coordination
Module 8 | Collaborative Modeling
👀 Current Week
Module 9 | Performance-Based Design
🔭 Future Weeks
CEE 120A/220A Contact Info - Summer 2023
Sheet1 Please enter your contact information on the lines below.,2 We'll use your Autodesk ID to invite you to join our Autodesk Construction Cloud project and several other software services that we'll use in the class. Thanks! Name,Stanford E-Mail Address,120A/220A,Other E-Mail Address,Autodes...
- Each student will have up to 2 extensions to use in the quarter for late submissions. Use them wisely!
- To request an extension, notify the teaching team at least 12 hours before the submission due time.
- Each extension will allow you to submit an assignment up to 2 days late with no points deducted for lateness.
- If you do not have an extension (or submit your assignments after the 2 day extension period has expired), 10% of the total points will be deducted from your score for each additional day late:
- Assignments one day late will be reduced by 10% of the total points.
- Assignments two days late will be reduced by 20% of the total points.
- Assignments will not be accepted if submitted after more than 1 week from the due time (or end of the extension period).
Hi CEE 120A/220A students!
The scores for the Module 2 assignment will be released soon. So, I wanted to share some notes with you about assignment grading and how to think about your assignment scores in this design workshop.
The most important point to keep in mind is that in a design workshop, there’s always room to improve your work. No one’s work is perfect — and this applies to my own work too — there are always things that I could do to make it even better.
Our approach in scoring the assignments is to always try to give pointers about the areas where you can continue to improve your submissions. So, for each assignment, your submissions are scored in four areas:
- completeness — Did you complete all the pieces asked for in the design brief?
- modeling accuracy — Was the model created using the best practices presented in the module? Were the elements placed accurately and join properly?
- design accuracy — Did the proposed design follow the design rules for required clearances, have the target square footage, and deliver on the desired features described in the brief?
- presentation quality — Was the design presented well in the Revit model sheets and views shared in your ACC upload and your posting on Notion?
In addition to the numeric scores, we also try to share comments and suggestions via your posting on Notion.
On the Module 2, of the 15 points possible, the range of scores varied from 8 points to 13 points. So, what does this mean?
The most important message that I really want to drive home is that you SHOULD NOT try to equate a letter grade for this assignment with these numeric scores. That’s not the way it works. Rather, we sum up all the numeric scores across all the assignments in the quarter and use the distribution to determine your course grade.
So, for example:
- A score of 12 out of 15 is not looked at as 80% and therefore map to a “B”. I’d look at a score of 12 (where the highest score was 13) as very good. There’s a little room for some targeted improvements, but overall, that near the top of the class.
- A score of 9 out of 15 is not looked at as 60% and therefore map to a “D”. A score of 9 (where the lowest score was 8) indicates that there are several things that you’ll want to look at more carefully for the next assignment.
Neither of these scores will absolutely determine your grade for the course. There are a lot of assignments to complete, and your scores will vary from assignment to assignment. So, don’t get discouraged because your assignment did not receive the maximum points - that’s normal and expected! In fact, achieving the maximum points on any assignment would be a truly remarkable feat.
So, how can you improve your scores? The best strategy that I’d highly recommend is to meet with the course assistant at office hours for some specific tips and guidance about how to improve your next submission. He can help you understand the nuances of what he’s looking for as he evaluates your submission and give very focused tips based on your actual submissions.
As many of you know from your other activities, a little personalized coaching and mentoring can be extremely helpful for refining and improving your performance.
Join our Cloud HD Video Meeting
Zoom is the leader in modern enterprise video communications, with an easy, reliable cloud platform for video and audio conferencing, chat, and webinars across mobile, desktop, and room systems. Zoom Rooms is the original software-based conference room solution used around the world in board, conference, huddle, and training rooms, as well as executive offices and classrooms. Founded in 2011, Zoom helps businesses and organizations bring their teams together in a frictionless environment to get more done. Zoom is a publicly traded company headquartered in San Jose, CA.
Autodesk Revit 2024 Content
The below information and links represent the Content Packs provided for Revit 2024 in all supported languages and locales. Content Packs for Revit LT 2024 can be found here. To apply the content files: Download the desired content pack to a local location Launch the content pack executable from the saved local location Important Notes: The content packs are intended to install into the Content Path specified when Revit 2024 or Revit LT 2024 was installed
🚫 All Submissions - For the Teaching Team's Use
Extensions Requested By Students (LATE SUBMISSION POLICY)
|Name||Last Name||Count DJ||Count Pts To Pndr||Created Date||Location||Autodesk ID||Stanford Email||Rollup 1|
Jun 25, 2023 10:01 PM
Jul 3, 2023 10:12 PM
Jul 8, 2023 9:09 PM
Jun 25, 2023 10:07 PM
Jun 25, 2023 10:07 PM
Jul 23, 2023 11:55 PM
Jun 25, 2023 1:56 PM
Jul 4, 2023 8:28 PM
Jun 25, 2023 10:10 PM
Jun 25, 2023 10:11 PM
Jun 25, 2023 10:11 PM
Jul 4, 2023 1:22 AM
Design Project Submissions
Points to Ponder
Pages from Prior Quarters
Help Choose the Time for our Weekly Kickoff Sessions
- Help choose our Kickoff Session Times by completing this poll:
Fall 22 - CEE 120A/220A - Kickoff Session Time - When2meet
Fall 22 - CEE 120A/220A - Kickoff Session Time To invite people to this event, you can email them, send them a Facebook message, or just direct them to https://www.when2meet.com/?16752760-KYnHb