Module 5
In this part I took the tower from the module and modified it by adding another parameter by swapping out the family for the second level and added a 4th level to better control the lofted geometry of the building. I also changed the family type for the second elevation with a triangle, to add variety in the overall geometry Then I set the project location to San Ramon, under the manage tab.
![image](https://www.notion.so/image/https%3A%2F%2Fs3-us-west-2.amazonaws.com%2Fsecure.notion-static.com%2F47bfb20a-1618-4b4d-82ff-224cccedb0b9%2FUntitled.png?id=1a9975e3-1254-49fd-a4b6-72df520b3e11&table=block)
![image](https://www.notion.so/image/https%3A%2F%2Fs3-us-west-2.amazonaws.com%2Fsecure.notion-static.com%2F9b4cce75-1ce0-40d2-a937-ae14fd0a0b48%2F51_levels_-_San_Ramon.png?id=8c896d17-c947-4bd2-964c-d50927414c17&table=block)
I then transferred the results for Floor Area and Surface Area to excel following the steps from the module:
![image](https://www.notion.so/image/https%3A%2F%2Fs3-us-west-2.amazonaws.com%2Fsecure.notion-static.com%2Fcf955406-88a1-43fb-a8a7-28cded10985b%2FUntitled.png?id=ac824512-346d-4524-af31-6c04712056b3&table=block)
And lastly, I added a third parameter to the evaluation to calculated Gross Volume of the building.
![image](https://www.notion.so/image/https%3A%2F%2Fs3-us-west-2.amazonaws.com%2Fsecure.notion-static.com%2Fbd3cc2f2-037c-45c4-9878-c7d336baea4c%2FUntitled.png?id=2e54573d-6b59-4797-a8f6-b33eec0f8d31&table=block)
In this logic, we are flexing the top height, where as it is also possible to flex the following parameters: Top Rotation Radius, Top Radius of geometry (increasing or decreasing triangle family). Mid Rotation radius, Mid height, and Base rotation and radius.
![image](https://www.notion.so/image/https%3A%2F%2Fs3-us-west-2.amazonaws.com%2Fsecure.notion-static.com%2F0027777e-85a9-4fae-9c03-24522d5e58b8%2FUntitled.png?id=641382dd-2576-417d-b561-b039e023daf1&table=block)