Please enter the following info in the fields above:
- Your Name as the Card title
- The link to your Module 2 folder in our Autodesk Construction Cloud project
Please also type the first few letters of your first name into the Link to Student field, then hover over your name from the list of matching records and click the blue plus sign to link this entry to your Design Journal.
There's no need to add new properties.
Then, share your Design Journal entry here (replacing these instructions) ... Just click in the text area below the headers, delete the instructions text, and start typing your response.
Please include:
- A screenshot of your model geometry
- A few sentences describing your modeling approach
I sadly ran into issues with Dynamo that tried to be fixed for 3 hours while is crashed and basically removed one of my drivers. I attempted the code learning and designing for hours before the crash and got up to 95% complete as shown below. The only remaining bug to work out in my code is why it was not rippling with the sin wave input while following all what I learned from Glenn.
I modeled to create the points varying in both directions and use them to measure the distance from my pebble drop. Cylinders were created as instructed with varying heights being input by the sin function as functions of the amplification, number of waves, etc.
/w=3840,quality=90,fit=scale-down)
/w=3840,quality=90,fit=scale-down)
/w=3840,quality=90,fit=scale-down)
/w=3840,quality=90,fit=scale-down)