Monami Waki

💡
Walk in the Park Model
image

The following steps comprise the modeling approach:

  1. Create a grid of 200’ x 200’ using cuboids.
  2. Select the center point at (100, 100) as the attractor point, or the basis from which the sinusoidal ripples will start. The center of the entire grid was selected to create a circular ripple effect for visual appeal.
  3. Determine the height of each cuboid based on its distance from the attractor point. Use these heights to shape the overall structure, following a sine wave pattern. The result is a visual ripple effect created by the varying cuboid heights.
  4. Shift up each cuboid by half of the height value of each cuboid and ensure that all cuboids are above z=0.

https://acc.autodesk.com/docs/files/projects/6db2c3ca-7a2c-4f34-96a1-8a8189c7754d?folderUrn=urn%3Aadsk.wipprod%3Afs.folder%3Aco.Y589NyteTiCBAQIqKUn4xg&viewModel=detail&moduleId=folders