This exercise is based on two main geometries, the first is a three sine wave curves which are located on the basis of the width, depth and three different relative height. The second is a main line located on the Y axis on which a set of poles are located distributed according to the depth parameter and the number of poles considering the height of the curves. The parameters that can be changed are, width, depth, and three different height for the sine curves which are translated according these parameters. Based on these curves are generated ribs to get points to set and located the panels which can be modified according with two parameters to get the relative location to the geometry and the desired thickness. Also the side poles can be modified according three parameters, the relative height, initial, and final radius, and the relative position of the upper side to the Y axis which is linked to width parameter. I want to mention that in my first approach I wanted to generate only the right side of the geometry and mirror it at the end of the sequence but the program turn too slow, mostly for the panel mirroring, only the poles were mirrored, thats why the mirror code block for the panels is blocked.
