- The Dynamo or Grasshopper scripts and all the supporting nodes needed to run your tool.
- Documentation for how to use your tool. It should include:
- A brief overview of what your tools does (to help users decide whether to download it and give it a try). Think of a “ReadMe” file for software.
- Basic building shape: width, length, floor to floor height
- Loads: dead load, superimposed dead load, live load
- Beam system: distance from beam to beam in x and y direction
- After receiving some imput: the weight and height of beam
- Create shape from basic building shape inputs
- Create a tributary area from the beam system inputs
- Create a total count of x and y direction beams from basic building shape inputs and beam system imputs
- Create beam DCR from shear and moment equations with the loads inputs and steps 1-3
- Create new input variable for beam sizing after the user considers outputs from step 4
- Create a total weight count, linear count, area count of beams
- DCR (Demand Capacity Ratio) of required beam size
- Linear footage of beam in x and y direction separately
- Floor to floor available distance
- Floor area
- A catchy name (or acronym) for your tool
- A teaser image that shows typical results, i.e. what users should expect to get as an output
- A link to a recorded video demo (4 minutes max) in which you demonstrate how a user would interact with and benefit from using your parametric design tool.
Intended users
The intended users of my project are structural designers, architects, and contractors.
Need you’re trying to provide a solution or support for
In the planning phase of a project there is a crucial factor to determine the structure and its costs. Structural steel can result in a large percentage of the projects price. However, structural steel must comply with AISC regulations on top of the heavy calculations of beam sizing. For architects, it is important to understand the layout of floor to floor spacing and this is determined by the size of the beams. Beams rely on a few imputs to determine sizing. With basic assumptions, I want to design a friendly imput user relationship that can determine the sizing of the beams and take an extra step to determine the amount of linear footage (helpful for contractors) and remaining distance from floor to floor distance usage available.
Inputs
Underlying logic of the model you’ll implement
Outputs
The QuickSteel App
DOWNLOAD ORIGINAL BY CLICKING THREE DOTS BUTTON