Please enter Your Name to link to your Design Journal, and paste a link to your personal folder on ACC in the ACC Folder Link field above.
For 2 Units
Please share your design showing the features of the proposed building envelope, including the locations and characteristics of:
- the wall and roof surfaces
Green Roof
Terrace Roof
Exterior Walls
Exterior Insulation and Finish System - Wall Drainage System
https://constructionmentor.net/exterior-insulation-finishing-systems-eifs/
In here, I made my own EIFS Wall structure, substituting out polystyrene for wood foam, a cellulose-based foam packaging, a reinforced natural fiber basecoat, plywood sheathing instead of fiberglass, complete with waterproofing, reinforcing, metal supports, and a gypsum wall board on the interior.
Interior Walls
- the openings/glazed surfaces
Floor Slab
Precast Concrete Panels: Prefabricated concrete panels can be manufactured off-site under controlled conditions, reducing waste and improving quality. They can also be designed for wide spans while maintaining structural integrity
Upper Floors
Sun Control
For 3 Units
- Use your Building Element Model to create an Energy Model.
- Submit this Energy Model to the Insight analysis tool to explore how the choices and specifications you’ve made in your Building Element Model affect the predicted energy performance.
- Be sure to set the Operating Schedule factor tile to use the BIM value.
- Narrow the range of values being considered for the building envelope-related factor tiles to focus on the BIM Model value or better.
- Explore how other factors (such as Photovoltaic panel options) can further improve your building performance — by using renewable energy to complement your energy saving envelope features.
- Share the results of your Insight optimization:
- Include an image of the EUI meter and range indicator after you’ve made your adjustments to show what your current assumptions predict and how much potential there is for additional improvements.
- List the key Factor Tile settings that are driving these results.
For 4 Units
- Use one of the Daylight Analysis methods demonstrated to assess the daylighting levels available with your proposed building envelope design:
- Choose one of these methods:
- Option 1: Use the Revit Lighting Analysis extension to produce an Illuminance Map of one of the levels of your proposed design.
- Be sure to watch the videos for tips about what you’ll needed to include in your building model for the lighting analysis to produce valid results. For example, you’ll need to place Rooms and Floors.
- To analyze your model for 0 credits, be sure to choose a single level at a time and use 72 inch grid as the analysis resolution.
- Paste an image of the resulting Illuminance Map.
- Option 2: Use the Revit Cloud Render tool to produce Illuminance Renderings of three key areas in your building model.
- Place cameras in your model to create 3D camera views to be rendered.
- Use the View > Cloud Render tool to generate Illuminance Renderings for these camera views.
- Paste images of the Illuminance Renderings into your Design Journal posting.