Creating Floors & Setting Properties
‣
Selecting & Listing Floors
‣
Changing Floor Properties
‣
Changing Floor Types
‣
Creating a New Floor Type
‣
Adding Floors
Adjusting Floor Structure & Layers
‣
Prompt | Tool Options
🟢 = Autodesk Asst
🔵 = Revit MCP
🟣 = Python + Dynamo |
List all the floors on all levels | 🟢 🔵 |
Select all the floors on L1 | 🟢 🔵 |
Select all the floors with Floor Type Generic - 12” | 🟢 🔵 |
List all the floors with the Structural property turned on | 🟢 🔵 |
Select the floors with Area less than 5000 SF | 🟢 🔵 |
Prompt | Tool Options
🟢 = Autodesk Asst
🔵 = Revit MCP
🟣 = Python + Dynamo |
Set the floors on Level L2 and set their Level to L3 | 🟢 🔵 |
Select the floors on Level L3 with Floor Type Concrete 4” and set the Height Offset from Level to 4” | 🟢 🔵 |
Set the floors on Level L4 and set their Room Bounding property to off | 🟢 🔵 |
Prompt | Tool Options
🟢 = Autodesk Asst
🔵 = Revit MCP
🟣 = Python + Dynamo |
Select the floor on level L1 and change its Floor Type to Floor Concrete 6” | 🟢 🔵 |
Select the floors on levels L2 through L4 and change their Floor Type to LW Concrete 3” on Composite Metal Deck 2” | 🟢 🔵 |
Select the floor on level L2 and change it to a Wood floor type | 🟣 |
Prompt | Tool Options
🟢 = Autodesk Asst
🔵 = Revit MCP
🟣 = Python + Dynamo |
Create a new Wall Type by duplicating the existing Concrete 6” floor type and name the new floor type "Concrete + Vinyl Plank"
Edit the structure of this new wall type to add a 1/8" thick Finish layer of the material named "Vinyl Plank" to the top of the existing layers | 🟣 |
Prompt | Tool Options
🟢 = Autodesk Asst
🔵 = Revit MCP
🟣 = Python + Dynamo |
Add a concrete floor slab on Level 1 | 🟣 |
Add a floor type with bubble slabs on Levels 2 and 3 | 🟣 |
Prompt | Tool Options
🟢 = Autodesk Asst
🔵 = Revit MCP
🟣 = Python + Dynamo |
Set the thickness of the Structural layer of floor type Concrete on Metal Deck to 6” | 🟣 |
Change the material of the Structure layer of floor type Concrete on Metal Deck to Concrete, Cast-in-Place | ??? |