Working links to both Arch and Stru models in Forma Data Management.
https://acc.autodesk.com/docs/files/projects/e3a33f23-3878-4fe5-bcef-920db4e80ca2?folderUrn=urn%3Aadsk.wipprod%3Afs.folder%3Aco.g_t64m3sQcOgdz9nUsTUYQ&entityId=urn%3Aadsk.wipprod%3Adm.lineage%3AjVo6ERNPRYKSQsQLnCNinA&viewModel=detail&moduleId=folders
https://acc.autodesk.com/docs/files/projects/e3a33f23-3878-4fe5-bcef-920db4e80ca2?folderUrn=urn%3Aadsk.wipprod%3Afs.folder%3Aco.g_t64m3sQcOgdz9nUsTUYQ&entityId=urn%3Aadsk.wipprod%3Adm.lineage%3AvLwIBixeQK65vDkUs3eX_g&viewModel=detail&moduleId=folders
Working link to your Individual Forma Board
did NOT USE
PDF sheet set of Structural Plans, 30 by 42 inches (E1 size)
Please paste your PDF sheet set here…
Classified clash report with counts.
Please paste your classified clash report here…
Design memo of 300 to 400 words: which system and why, where the grid fought your architecture, what you changed in the architectural model.
I chose a mix of concrete and wood because I've worked roofing before, so I know homes are usually made of wood. I used wood for all floors above the ground floor to the first floor. I thought this would make things less expensive. However, I made the ground floor concrete since I have glass curtain walls, and I feel concrete looks better with them than wood. There's also a patio, and I usually see patios made of concrete rather than wood. Also, commercial areas are usually made of concrete and steel but the recording Cesar made was displaying concrete already and it is more commonly used for the base of a building. The concrete gave me the aesthetic I wanted but costs more compared to wood. The grid fought my architecture in lots of ways. One example is that the ground floor column does not reach the floor. This is an issue from forma model transferring to revit due to two plans being attached to each other but it makes one go slightly above the other, which causes the column to not reach from floor to floor. Also some columns overlapped with the stairs which is due to a column in the corner of a stairwell because the stairs sit in the building corner where the columns start. Furthermore, I noticed columns would overlap with rooms as well, I think this is normal though because we started building without accounting for the structural components. I didn’t make changes for the overlap floor but if I was to do this again, I would make sure there aren't two floors attached to each other, which would resolve the column issue. I also didn’t make changes for the columns because that would be too difficult, if anything impossible. I was going to ask due to us having a lot of wall couldn’t we just use shear walls instead of columns?Â