I began by connecting the plumbing fixtures into designated pipes and found it convenient that pipes did not intersect when I used the “connect into” tool, so I did not have to rework such clashes. I then mirrored the pipe systems to the North restrooms. At first I thought that the pipe connections to the plumbing fixtures would be perfect, then I realized the restrooms aren’t perfect mirrors as the sinks and toilets are on opposite sides. So then I fixed this. I had to elongate the horizontal part of the hot water pipe to reach the sinks, add in the sloped sanitary pipe because it didn’t copy over, and cap the pipes because the caps from the south restrooms didn’t copy over and thus caused other pipes to be silly before I realized the main pipes were open. Upon copying the Level 0 plumbing to Level 1, I had to again add in the horizontal sanitary pipe because it was not selected when I copied the elements, then reconnect these pipes.
an absolute slay. incredibly satisfying.
![Level 1 North restroom (with many partitions and the floor hidden in view).](https://www.notion.so/image/https%3A%2F%2Fs3-us-west-2.amazonaws.com%2Fsecure.notion-static.com%2F6c928153-f2ef-4ac2-b324-6bf635e544bd%2FUntitled.png?id=efb2c979-b39d-49b2-ad3e-a4554bb9b0e0&table=block)
![image](https://www.notion.so/image/https%3A%2F%2Fs3-us-west-2.amazonaws.com%2Fsecure.notion-static.com%2Ff8d052d9-737a-406f-b063-38454f11ba4e%2FUntitled.png?id=c791fce6-1dc2-448a-bf5c-e13d5a2bf1f1&table=block)